The Castlewood SY-JSKHF Shaker Wood Range Hood Front is made from hardwood plywood and solid lumber and is available unfinished in alder, cherry, hickory, maple and red oak. Hood Fronts are an economical way to add style and value to your kitchen interior. They are designed tofit between wall cabinets and simulate a fully boxed cabinet. When metal liners and ventilation units are installed, these range hood fronts blend seamlessly into the overall kitchen design.
Available SpeciesAlder, Cherry, Hickory, Maple, Red Oak, and Primed Maple
SY-JSKHF3024: H 24" | W 30" | D 7-1/4"
SY-JSKHF3030: H 30" | W 30" | D 7-1/4"
SY-JSKHF3036: H 36" | W 30" | D 7-1/4"
SY-JSKHF3624: H 24" | W 36" | D 7-1/4"
SY-JSKHF3630: H 30" | W 36" | D 7-1/4"
SY-JSKHF3636: H 36" | W 36" | D 7-1/4"
These wood range hood fronts are designed to accept the liners and ventilators listed on this page as options. If you have a third party ventilator, please contact us to make sure the unit will fit. Most third party ventilators will require a width or depth customization to the hood.If you are struggling to decide which ventilator is the right fit for you, consider the range or cooktop this hood will cover. Electric cooktops generally require a lower CFM than gas cooktops.
A hood front must be installed between two cabinets. It will fasten to the cabinet frame, simulating a fully boxed hood. Due to the shape of the hood front design, this style requires a T-Shaped liner.